USB 3.0

What's new in USB 3.0?

Unlike the change from USB 1.0 to USB 2.0, USB 3.0 brings actual physical differences to the connectors. The flat USB Type A plug (that goes into the computer) looks the same, but inside is an extra set of connectors; the edge of the plug is colored blue to indicate that it's USB 3.0.
On the other end of the cable, the Type B plug (that goes into the USB device) actually looks different -- it has an extra set of connectors, so it looks a bit like a USB plug that's been crimped a little ways down one end. There's also a new Micro Type B plug that has all its connectors laid out horizontally.

The USB 3.0 plug has an extra set of connectors.

As a result, you won't be able to fit a USB 3.0 cable into a USB 2.0 device. However, you will be able to plug USB 3.0 devices -- and cables -- into your current computer; you just won't get the speed advantage. (Note: To get the most out of USB 3.0, the cable needs to be less than about 9 feet long, down from the USB 2.0 16-foot limit.)
The reason for the new connector is that the USB 3.0 cable contains nine wires (four more than a USB 2.0 cable); eight carry data and one is used as a ground. Despite the increase in wires, however, the cables should be no thicker than those used by USB 2.0. There will be a big difference in performance, however. USB 2.0 is like a single-lane country road that needs to handle the morning-commute traffic in and out of L.A. There are jams and slowdowns when too much data is going back and forth. With nine wires available, USB 3.0 has an additional two lanes of traffic in each direction to smooth the flow between the computer and the device.